🚚 FREE Standard Shipping on Orders Over $250
More Vents, Less Cents! Save Up To 30%
| Item No: | Nominal Size | Size (Duct Opening) | Model | Slots | Neck Size | Actual Size | Material | Outer Dimensions | Color | Airflow Direction | Bulk Pricing | Order | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 2-10 | 11-20 | 21-49 | 50+ | 100+ | ||||||||||||
| 820101-3 | 6" Neck | Steel | Silver | $23.39 | $22.23 | $21.76 | $21.29 | $21.06 | |||||||||
| 820103-1 | 4" Neck | Steel | Silver | $19.38 | $18.42 | $18.42 | $18.42 | $18.42 | |||||||||
| 820102-3 | 6" Neck | Steel | Silver | $16.20 | $15.39 | $15.07 | $14.75 | $14.58 | |||||||||
| 820102-1 | 4" Neck | Steel | Silver | $16.18 | $15.38 | $15.05 | $14.73 | $14.57 | |||||||||
| 820101-2 | 5" Neck | Steel | Silver | $17.10 | $16.25 | $15.91 | $15.57 | $15.39 | |||||||||
| 820103-3 | 6" Neck | Steel | Silver | $19.96 | $18.97 | $18.97 | $18.97 | $18.97 | |||||||||
| 820103-2 | 5" Neck | Steel | Silver | $14.24 | $13.53 | $13.53 | $13.53 | $13.53 | |||||||||
| 820102-2 | 5" Neck | Steel | Silver | $13.79 | $13.11 | $12.83 | $12.55 | $12.42 | |||||||||
| 820101-1 | 4" Neck | Steel | Silver | $14.12 | $13.42 | $13.14 | $12.85 | $12.71 | |||||||||
| 820101-4 | 8" Neck | Steel | Silver | $22.49 | $21.37 | $20.92 | $20.47 | $20.25 | |||||||||
Dryer vent covers cap a dryer exhaust duct on the outside wall, built from SS304 stainless steel with a weatherproof rubber seal that blocks insects and moisture at the opening. Within the Exterior Louvers range, AirGrilles stocks the dryer vent cover in silver, connecting to the round duct in 4 neck sizes, 4, 5, 6, and 8 inches. The round face integrates the grille directly into the cover, and 4 mounting screws install the cover on the exterior wall outlet. Bulk pricing runs across 6 quantity tiers with savings up to 30%, orders of 500+ units qualify for custom production, and in-stock items ship the same day on orders placed by 11AM ET.
Dryer vent covers cap the dryer exhaust duct where it exits the exterior wall, built from SS304 stainless steel to hold up against direct weather exposure. Within the Exterior Louvers range, the dryer vent cover is the style built specifically for exhaust ducts, separate from the gable and wall vents that ventilate an attic instead. A weatherproof rubber seal fits around the cover, blocking insects and moisture from entering the ventilation system and the wall opening behind it. The silver stainless finish resists corrosion without a painted coating.
The dryer vent cover uses a round face with the grille integrated directly into the cover, rather than a separate screen or insert. Four mounting screws install the cover on the exterior wall outlet, matched to the neck size ordered. The round shape and open grille face let exhaust air move out from the duct without the cover restricting the airflow. Confirm the duct's neck size before ordering, since the cover connects directly to that measurement.
Dryer vent covers are ordered by the round duct neck size, not a width-by-height opening the way a wall or ceiling register is. AirGrilles stocks 4 neck sizes, 4, 5, 6, and 8 inches, matched to a standard dryer exhaust duct. For attic or exterior wall ventilation instead of a dryer exhaust, Aluminum Exterior Vents cover that use case instead. Bulk pricing spans 6 quantity tiers, from 1 unit to 100+, with savings up to 30% at the higher tiers. Orders of 500+ units qualify for custom production depending on size, finish, and lead time, and in-stock items ship the same day on orders placed by 11AM ET.
These answers cover the material, seal, sizing, and ordering questions that come up most on dryer vent covers.
The dryer vent cover is built from SS304 stainless steel, a grade chosen for its resistance to corrosion in direct outdoor weather exposure. The finish ships in silver, the natural stainless steel appearance rather than a painted color. No additional coating is needed for weather resistance.
Yes, a weatherproof rubber seal fits around the cover to block insects and moisture from entering the ventilation system and the wall opening behind it. The seal sits between the cover and the exterior wall surface. Check the product listing for the seal's exact placement and fit before ordering.
Measure the round duct's diameter and match it to the closest neck size, 4, 5, 6, or 8 inches. The cover connects directly to that duct neck rather than a width-by-height opening. Confirm the duct diameter before ordering, since the cover will not seat on a mismatched size.
A dryer vent cover caps a dryer exhaust duct on the exterior wall, while an Aluminum Exterior Vent ventilates an attic or wall cavity through a louvered face. The dryer cover is sized by the round duct neck, and the gable vent is sized by the wall opening. Choose based on whether the opening is a dryer exhaust or general attic and wall airflow.
The cover installs on the exterior wall outlet with 4 mounting screws, matched to the duct's neck size. No additional hardware is needed beyond the screws included with the cover. Confirm the wall surface can hold the screws securely before installing.
Yes, bulk pricing applies automatically across 6 quantity tiers, with savings up to 30% at the 50+ tier. Orders of 500+ units qualify for custom production depending on size, finish, and lead time. In-stock items ship the same day on orders placed by 11AM ET.
Fit 5" exhaust perfectly
Solid quality product but one significant concern
Superior to the plastic junk that is out there. Well made, looks good.
Good quality and will probably last forever
Nice Looking for a Dryer Vent Cover
No reviews match this filter.
Fit 5" exhaust perfectly
Thanks for subscribing!
This email has been registered!
Order by the duct opening, not the faceplate. Remove the vent and measure the hole behind it, then order that size. Getting it right the first time means no returns, no reorders, and no waiting on the job.
