| Item No: | Nominal Size | Size (Duct Opening) | Model | Slots | Neck Size | Actual Size | Material | Outer Dimensions | Color | Airflow Direction | Bulk Pricing | Order | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 2-10 | 11-20 | 21-49 | 50+ | 100+ | ||||||||||||
| 310104-3 | Wood | 24"W x 4-1/2"H x 2-3/4"D | Oak | $86.69 | $78.03 | $75.43 | $72.82 | $69.36 | |||||||||
| 310104-1 | Wood | 15"W x 4-1/2"H x 2-3/4"D | Oak | $47.59 | $42.84 | $41.41 | $39.98 | $38.08 | |||||||||
| 310104-2 | Wood | 18"W x 4-1/2"H x 2-3/4"D | Oak | $52.89 | $47.61 | $46.02 | $44.43 | $42.32 | |||||||||
Wooden corner baseboard supply registers cover the supply opening where a wall meets the floor, with a faceplate crafted from natural solid oak. AirGrilles stocks them in 3 widths, 15, 18, and 24 inches, each 4-1/2 inches high and 2-3/4 inches deep, so the register sits at baseboard height without a bulky profile. A removable front panel with metal slots lets the face come off for cleaning, and a wood flap damper behind it controls how much air enters the room. Bulk pricing runs across 6 quantity tiers with savings up to 30%, orders of 500+ units qualify for custom production, and in-stock items ship the same day on orders placed by 11AM ET.
Why an Oak Faceplate at Baseboard Height
A baseboard supply opening sits in plain sight at floor level, where a painted metal face reads as hardware and an oak face reads as trim. Within the baseboard supply registers range, the wooden version is the pick for rooms where the register should follow the woodwork instead of interrupting it. Natural solid oak takes stain evenly, so the faceplate can be finished to match the baseboard, the flooring, or the door casing around it. The wood also stays quiet as air passes through, without the tick and rattle a thin metal face can develop.
Cleaning Access and the Wood Flap Damper
The front panel lifts off the register, so the metal slots and the space behind them can be cleaned without unscrewing anything from the wall. That access matters at floor level, where baseboard supply openings collect dust, pet hair, and debris faster than a wall or ceiling register does. Behind the panel, a wood flap damper opens and closes to set how much air comes through, giving room-by-room control from the same face. With airflow and cleaning handled, the remaining decision is the size and the clearance.
Sizing, Depth, Bulk and Custom Orders
Wooden corner baseboard registers are listed by their overall dimensions, given as width by height by depth, rather than by a duct opening measurement. Each model stands 4-1/2 inches high and projects 2-3/4 inches deep, so confirm the clearance in front of the opening before ordering, especially where furniture or a door swing sits close to the wall. For the same openings in a painted metal finish, steel corner baseboard supply registers cover the steel side of the range. Bulk pricing spans 6 quantity tiers: 1, 2-10, 11-20, 21-49, 50+, and 100+, with a 24 inch register falling from $59.05 at a single unit to $41.34 at the 50+ tier, a savings of 30%. Orders of 500+ units qualify for custom production depending on size, finish, and lead time, and in-stock items ship the same day on orders placed by 11AM ET.
Common Questions About Wooden Corner Baseboard Registers
These answers cover the wood, sizing, cleaning, and ordering questions that come up most on wooden corner baseboard supply registers.
What size do wooden corner baseboard registers come in?
The range covers 3 widths, 15, 18, and 24 inches, with every model 4-1/2 inches high and 2-3/4 inches deep. Those dimensions are the overall size of the register itself, not a duct opening measurement. Measure the space the register needs to cover, then match it to the closest listed width.
How much room does the register need in front of the wall?
Each model projects 2-3/4 inches out from the wall at the base, which is the number to check against furniture, door swings, and floor trim. The 4-1/2 inch height keeps the face within typical baseboard proportions in most rooms. Confirm both figures against the space before ordering.
How do you clean a wooden baseboard register?
The front panel is removable, so it lifts off and the metal slots behind it can be wiped or vacuumed without tools. Baseboard openings sit at floor level and collect more dust than higher registers, so this access is worth having. Reinstall the panel by hand once the face is clean.
What does the wood flap damper do?
The flap damper sits behind the faceplate and opens or closes to control how much air enters the room. It gives the same room-by-room balancing a metal damper provides, in a wood component matched to the register. Set it once the room is in use and adjust as the seasons change.
Can the oak faceplate be stained to match my trim?
The faceplate is natural solid oak, which takes stain and sealer evenly, so it can be finished to match baseboards, flooring, or casing. For matching registers in the floor of the same room, wooden floor supply registers carry the same oak face. Finish both together if the goal is a consistent tone across the room.
Is there a bulk discount on wooden baseboard registers?
Yes, bulk pricing applies automatically across 6 quantity tiers, with savings of 30% at the 50+ tier. A 15 inch register drops from $32.39 per unit to $22.68, and an 18 inch from $44.09 to $30.87 at that tier. Orders of 500+ units qualify for custom production depending on size, finish, quantity, and lead time.
- Choosing a selection results in a full page refresh.